pedal e bikes Pedal Brewer Electric Cruiser Bike 540Wh Matte Green – Jonny Sprockets Bike Shop
SKU: 62982671232
pedal e bikes

pedal e bikes Pedal Brewer Electric Cruiser Bike 540Wh Matte Green – Jonny Sprockets Bike Shop

$24.74 $27.49
Save 10%
No.2 Bestseller on www.kerrimatt.com >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

pedal e bikes Pedal Brewer Electric Cruiser Bike 540Wh Matte Green – Jonny Sprockets Bike ShopWith the Pedal Brewer Electric Cruiser Bike 540Wh you can move about town with ease and in style. Featuring a 540Wh battery and a bump start button to make getting moving a breeze, Brewer has sufficient range for up to 50km! The Brewer weighs approx 26kg. The Brewer also has confident fat tyres, powerful hydraulic disc brakes, cool West Coast USA styling and light cargo capability. The Brewer can be fitted with cargo racks, available as an optional

With the Pedal Brewer Electric Cruiser Bike 540Wh you can move about town with ease and in style. Featuring a 540Wh battery and a bump-start button to make getting moving a breeze, Brewer has sufficient range for up to 50km! The Brewer weighs approx 26kg.

The Brewer also has confident fat tyres, powerful hydraulic disc brakes, cool West Coast USA styling and light cargo capability. The Brewer can be fitted with cargo racks, available as an optional extra, which are capable of holding up to 10kg on the front and 40kg on the rear. The bike is also suitable for most rear rack mounted baby seats.

*Passenger or rear cargo weight should never exceed two-thirds of the rider's body weight (up to the max operating limit of 40kg). Pedal's recommendations are intended to provide guidance around safe operating procedures.

BATTERY 540Wh 36V Li-Ion Removable Pod
MOTOR 250w 25kph CZJB 110C Rear Hub 50Nm
SENSOR Crank mounted cadence sensor
DISPLAY KD58C LCD + 6kph Left Hand Thumb throttle
FORK Custom Hi-Ten Steel w/blended crown
COCKPIT BMX style riser cruiser bar
GRIPS Textured Ergo rubber 125mm
SADDLE Wide comfort ergo
BRAKES Tektro M275 Hydraulic Disc w/ F160mm / R160mm rotor
DERAILLEUR Shimano 1x7 Tourney TY200
FREEWHEEL Shimano TZ500 14-28t
SHIFTER LTwoo 7 speed trigger
CRANK 48t Steel 3pcs w/ Alloy Crank Arm w/double sided arm
PEDALS Alloy MTB Platform 9/16”
TYRES 20” x 4” Knobbly S/V
RIM 20” Single Wall Alloy 80mm
SPOKE Stainless Black Coated
FR HUB Loose Ball Nutted
ACS Resin mudguards, rear alloy kickstand, 6v integrated LED lights,
rear passenger pillion carry kit

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 62982671232

Discover Niche Categories That Outsell pedal e bikes

Top-Converting Item to Boost Your Average Order

4.3 ★★★★★
Based on 2048 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nc
Waukegan, US
★★★★★ 4
Pretty good, take your time and install it well
Size: side table leg
Materials are pretty solid, but once assembled it’s not as sturdy as you would think it should be since the material itself was solid, i say give them a chance, everything out there that’s similar is way over priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
Roberta Mayes
Alexandria, US
★★★★★ 5
Heavy duty legs for table.
Size: side table leg
Perfect legs for a table I am having made. I have an cottonwood slice. It's heavy and needed something substantial. These are perfect.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
R
R. Moheban
Dallas, US
★★★★★ 5
Robust pipe & fittings with a beautiful, smooth black finish
Size: side table leg
This set of pipe & fittings for use as low table legs is heavy duty and aesthetically pleasing. Especially when the pieces are handled, the tactile sensation is much nicer than with plumbing steel pipe because this product is beautifully finished smooth. The black pipes are quite smooth as well as the fittings. The pieces are all also pretty robust, though the wall thicknesses are less than in pipe for pressurized water systems. Of course that makes sense as this product does not need to hold fluid pressure. In my view they got the heaviness factor of this product just right; it's not as heavy or robust as black pipe used in natural gas supplies, but still robust and pretty heavy. Assembled, this product is absolutely stiff and unyielding for a solid table that could hold a man's weight easily. The feet utilize a brilliant scheme so that each foot can be independently adjusted for an uneven floor. Thus a level table on an uneven floor is easily accomplished. The feet simply extend the effective leg length by screwing counter-clockwise. To prevent any shifting at the threads adding some pipe compound or teflon tape may be advised. Even masking or duct tape might work as the idea is to just fill any gaps where male threads meet female threads. The four flanges at the tops of the legs provide a wide, solid surface for attaching the table top, with either hidden screws underneath or you could through-bolt a glass table top (provided you have the skill to drill glass!). I think this product would look great with a glass top. Assembly is quick and easy. The hardest part is drilling holes underneath the table top to accept screws. No pipe wrenches are needed as the pieces screw together by hand to an adequate tightness. If any doubt whether they are tightened enough have a strong person with grippy gloves finish. The "X" in the center attaches to the legs with a very clever machine screw system tightened with the included hex wrench. This is presumably because if tightened simply by screwing the fittings, the point of snugness would not likely be where the "T" fittings are exactly vertical. The maker has solved this problem so that you are assured that all legs will be in the perfect vertical position once everything is tight. The setup is also nice and rigid once tightened. This is a huge benefit of steel pipe projects; they are really solid. The black finish is clearly very durable, like a powder coat. It appears that it will provide excellent protection against rust. Coverage is complete; I found no dings or scratches anywhere on any piece. Overall this is a very well-designed product for function and aesthetics. Perfect for a beautifully renovated warehouse condo where an industrial vibe is desired in a rock-solid table that won't shift around. The smoothness of the pipe is top notch. I've used lots of pipe in projects, some of it actual water pipe and some decorative pipe such as this. I've never seen better quality decorative pipe as this maker put in the effort to finish it beautifully smooth. At currently $34.99 I find the price quite reasonable too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 18, 2026
P
Verified Purchase
patricia
San Leandro, US
★★★★★ 3
the height is only 16"
Size: coffee table leg
The height is only 16". From the description it appears to be 24" wide and 24" high.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
C
CMC20
Whiting, US
★★★★★ 4
Good DIY Pipe Legs but Powder Coat Quality Lacks
Size: side table leg, Size: side table leg
These industrial style pipe legs make building a DIY end table easy and the kit saves a trip to the hardware store. The fittings go together normally and assembly is simple. Comes individually wrapped. My main issue is the powder coating looks and feels cheap and rubs off easily. The pipes already had marks from touching each other from unboxing. If you do not mind some wear on the finish over time this is a decent purchase. The metal at the hardware store will be thicker and more durable but will cost more. I’d recommend based on ease of having a kit and it being delivered saving me a trip.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 30, 2025

recommand products

Coleman Instant Up 6-Person Excursion Tent With Vestibule
20.06
Camel Crown 6-Person Family Auto-Pitch Camping Tent – camel outdoor
25.05
6 Person Instant Blackout Tent
29.18
CinchTite Tarp Zipper Door KZ007970 – TESCO Building Supplies
27.44
Zipper Pack for Tarp / Plastic Enclosure
20.15